Top Cables and Wires

All Aluminium Conductors AAC
(size .25 Sq.mm. to 630 Sq.mm. in 2 to 4 core. 1000 Sq.mm in single core)

All Aluminium Conductors AAC
   
Price:  Negotiable View More
Min. Order ( Meter) Unit Price
1000 Negotiable
Trade Terms:  FOB, EXW, CFR, CIF
Payment Terms:  L/C, T/T, Western Union
Price Valid Time:  From Jul 18, 2012 To Oct 31, 2013

Basic Info.

Model NO.:  Power Cables
Certificate:  ISO
Current:  DC & AC
Voltage:  Low and Medium Voltage Cable
Insulation Material:  PVC
Application:  Industrial
Export Markets:  Global

Conductor

Annealed Bare Electrolytic Grade Copper / Aluminium Conductor conforming to IS:8130:1984. Shaping of Conductor is applied above 10.0 Sq.mm. in Aluminium & 6.0 Sq.mm. in Copper.

Insulation

Type A PVC Compound capable of withstanding conductor temperature up to 70 degrees C for general purpose insulation & 85 degrees C for Heat Resistant insulation conforming to IS:5831:1984 or XLPE insulation for conductor temperature up to 90 degrees C.

Color Of Cores

Cores are identified with a color scheme as per IS:1554(Pt-I):1988 as under :

  • Cores - Red, Black, Yellow, Blue or Natural (non-pigmented).
  • Cores - Red & Black
  • Cores - Red, Yellow & Blue.
  • Core - Red, Yellow, Blue & Black.(Reduced Neutral Core in case of 3 ½ Core)
  • Cores - Red, Yellow, Blue, Black & Grey
In case of cable exceeding five cores, two adjacent (counting and direction cores) in each layer shall be colored Blue, Yellow and remaining cores grey or cores can be identified by numbers by numbers printed on that of same color.

Laying Of Cores

Cores are laid up as per the above color scheme. The final lay direction shall be kept right hand.

Inner Sheath

The Inner Sheath is applied over laid up of cores by extrusion / wrapping of thermoplastic material.

Armoring

It is applied over inner Sheath. It may consist of galvanized Round Steel wires or galvanized Flat Steel Strips conforming to IS:3975. Round Wire armoring is provided , where the calculated diameter under Armour is 13.0 mm. Above this, armoring is either round wire/steel strip. In single core cables used in AC systems, armoring I done by non-magnetic hard drawn aluminum wires / strips

Outer Sheath

A final covering of PVC Compound, conforming to IS:5831:1984, is applied over Armoring in case of Armored Cable or over Inner Sheath in case of Unarmored Cable, called as "Outer Sheath".

The insulation, inner sheath & outer sheath can be of HR PVC, FRLS PVC, FRHF (Flame Retardant Halogen Free) or ROHS Compound depending upon the application.

All Aluminium Conductors AAC
Design and Developed By Xavia360.org